Proportioners
Spray Guns
Spray Hoses
Transfer Pumps
Safety & Protection
Gensets & 
0.5lb Open-cell Spray Foam
2.0lb Closed-cell Spray Foam
3.0lb Roofing Foam
Silicone Coatings
Sealants
1.0lb Kits
2.0lb Kits
3.0lb Kits
closeGraco Whip Hose
)
view largerDurable design, appropriate length to help increase sprayer efficiency.
Graco's hose design is the most advanced in the plural-component hose systems. The whip hose is designed in shorter heated lengths so that it is easily handled and has fewer components than the heated sections to prevent possible damage. Graco's Whips are available in both 10 ft. and 3 ft. sections.- Available in different pressure ratings, lengths, and diameters.
- They heat quickly using copper-wound technology.
- Different fittings on the A and B sides to prevent incorrect connections.
- Very low permeability to avoid crystallization and/or other chemical reactions of the materials in the lines.
Components and details of a Graco Heated Hose System
- Fluid Temperature Sensor (FTS)
- Fluid Temperature Sensing cable
- Hose assembly cable
- Heated hose wire
- Air line
- Fluid hoses
- Ground wire
There are many different ways you can setup your heated hose system. CPi has picked a few of the most common methods and outlined them below.
2000/3500 psi 150 ft. Hose System (normal flow)
- Two 50ft lengths of 3/8" Heated Hose with Thermocouple Wire
- Fluid Temperature Sensor
- 50ft length of 3/8" Heated Hose
- 10ft length of Whip
- 50ft length of Scuff Jacket
2000/3500 psi 300ft Hose System (high flow)
- Two 50ft lengths of 1/2" Heated Hose with Thermocouple Wire
- Three 50ft lengths of 3/8" Heated Hose with Thermocouple Wire
- Fluid Temperature Sensor
- 50ft length of 3/8" Heated Hose
- 10ft length of Whip
- 50ft length of Scuff Jacket
