Medium-density, disposable Home Sealing spray foam kit

Touch 'N Seal Spray Foam Kits are designed for use in commercial sealing, insulating, patching and filling applications. Portable and disposable, these two-component foam systems provide a quick, consistent flow of polyurethane foam that dries in less than one minute.

Spray Foam Kit 200 & 600 both included the following:

• Two cyclinders (Components A & B)
• P2 anti-crossover gun with 10' hoses
• Extra Nozzles (5 of each)
• Latex Gloves
• Assembly Wrench
• O-ring
• Petroleum Jelly

Technical Data

• Class 1 flame retardant
• ASTM E-84: FSI 15/SMK 450 @ 2" thickness
• Radiation Panel Burning Test
• ASTM E-162: FSI 6
• Density (ASTM D-1622): 1.75 +/- 0.2 lb/cu. ft.
• K-Factor (ASTM C-518): 0.16 BTU • in • hr -1 • ft -1 • F -1
• R-Value (ASTM C-518): 6.23 per inch
• Compressive Strength (ASTM D-1621):
• 10% parallel: 13.2 psi, 10% perpendicular 6.8 psi
• Tensile Strength: (ASTM D-1623): 22 psi
• Dimensional Stability (ASTM D-2126):
• -40°F, 2 weeks: +.88% volume change
  158°F, 100% RH, 2 weeks: +14% volume change
• Water Absorption (ASTM D-2842): 1.0-3.5% vol
• Closed Cell Content (ASTM D-2856): 90% minimum
• Maximum Service Temperature for Cured Foam: 240°F (116°c)
• Shelf Life: 12 months
• Use all contents within 30 days of intial dispensing

These 2 lb. spray foam insulation kits should be used wherever thermal insulation is needed. Compared with the 1 lb. kit, these 2 lb. kits offer greatly improved perm ratings and qualify as vapor retarders. Electricity and compressed air are not required. The whole kit, including the gun, is disposable, and is thus the fastest and most cost effective way to get small jobs done quickly.

The value of these kits lies in their 3-minute setup, versatility and easy disposability.

Insulation Contractors-Small jobs/touch-ups

Foam kits are ideal for small jobs because they are portable, self-contained and a cost effective method to get the job done quickly.

Cold Storage Construction

Foam kits are a useful tool to seal roof and wall junctions as well as wall to ceiling and wall to floor junctions.

RV & Bus Industry

Foam kits can be used to insulate and reduce road noise in the vehicle manufacturing.

Plant Maintenance and Repair

Because foam kits are portable and require no outside power source, they are ideal for general maintenance and HVAC applications.

Duct Work Sealing

Even fairly new duct work often is quite leaky. Contractors and home owners alike can reseal ducts and often reduce the air and energy loss from 30% to 50% to nothing.