Low-density, disposbale Home Sealing spray foam kit

Touch 'N Seal Home Sealing spray foam kits are uniquely formulated and specifically designed for use in commercial and residential insulating projects. Thinly applied in the wall cavity or picture framed around the studs, Home Sealing spray foam kits eliminate air infiltration, offering the best building envelope solution.

Spray Foam Kit 300 & 1000 both included the following:

• Two cyclinders (Components A & B)
• P2 anti-crossover gun with 15' or 30' hoses
• Extra Nozzles (5 of each)
• Latex Gloves
• Assembly Wrench
• O-ring
• Petroleum Jelly

Technical Data

• Density (ASTM D-1622): 1.0-1.25 lb/cu. ft.
• Yield
• Foam Kit 300: 33.6 cubic feet / 300 board feet @ 1" thickness
• Foam Kit 1000: 112 cubic feet / 1000 board feet @ 1" thickness
• Water Vapor Permeation (ASTM E96): 5.4 perm-inch
• R-Value (ASTM C-518): 4.0 per inch
• Closed Cell Content (ASTM D-2856): 50%
• Compressive Strength (Parallel, ASTM D-1621): 5 psi
• Water absorption (ASTM D-2842): 3-4% volume
• Maximum Service Temperature for Cured Foam: 200°F (93°C)
• Class 1 flame retardant
• ASTM E-84 Flame Spread: 25
• Smoke Developed: 145 @ 1" thickness
• Shelf Life: 12 months
• Use all contents within 30 days of intial dispensing
• Touch 'N Seal Spray Foam Kits 300 & 1000 are not intended to be a water vapor barrier or water vapor retarder
• These kits are also known as froth foams

This foam insulation may be used wherever thermal or acoustical insulation is needed. Electricity and compressed air are not required. The whole kit, including the gun, is disposable, and thus the fastest, most cost effective way to get small jobs done quickly.

The value of these kits lies in their 3-minute setup, versatility and easy disposability.

Insulation Contractors-Small jobs/touch-ups

Foam kits are ideal for small jobs because they are portable, self-contained and a cost effective method to get the job done quickly.

Cold Storage Construction

Foam kits are a useful tool to seal roof and wall junctions as well as wall to ceiling and wall to floor junctions.

RV & Bus Industry

Foam kits can be used to insulate and reduce road noise in the vehicle manufacturing.

Plant Maintenance and Repair

Because foam kits are portable and require no outside power source, they are ideal for general maintenance and HVAC applications.

Duct Work Sealing

Even fairly new ducts often leak quite a bit of conditioned air. Contractors and home owners alike can reseal ducts and often reduce the air and energy loss from 30% to 50% to nothing.