Proportioners
Spray Guns
Spray Hoses
Transfer Pumps
Safety & Protection
Gensets & 
0.5lb Open-cell Spray Foam
2.0lb Closed-cell Spray Foam
3.0lb Roofing Foam
Silicone Coatings
Sealants
1.0lb Kits
2.0lb Kits
3.0lb Kits
closeGraco T1 Transfer Pump
)
view largerRely on Graco transfer pumps for increased output and longer life
Graco T1 and T2 pumps maintain performance in any environment, even with higher viscosity materials. Spend more time spraying and less time on maintenance with the Graco 2:1 transfer pumps.- O-ring seal design is more durable and lasts longer - more spraying uptime and less time on maintenance
- Provide consistent feed pressures and flow rates for dependable results
- Lower pressure drops with higher viscosity materials at any ambient temperature
- Designed and manufactured by the worldwide leader in pump technology
Consistent feed pressures and flow rates for consistent results
- Longer lasting pump - designed for durability with less maintenance
- Quick-release bung adapter for easy drum removal without interference from hose connections
- Stainless steel wetted parts for corrosion-resistance
- PTFE seals for improved performance and less maintenance
| Ratio | 2:1 |
| Maximum Output - continuous | 2.5 gpm (9.5 lpm) |
| Maximum Output - intermittent | 4.0 gpm (15 lpm) |
| Maximum input air pressure | 180 psi (12 bar, 1.2 MPa) |
| Maximum output fluid pressure | 360 psi (25 bar, 2.5 MPa) |
| Maximum ambient temperature | 120°F (50°C) |
| Maximum fluid temperature | 190°F (88°C) |
| Weight | 17 lb (7.7 kg) |
| Dimensions | 51.5 in (130.8 cm) length 2.6 in (6.6 cm) diameter (cap) |
The Graco Transfer Pumps are built with a diversity in mind as can be seen by the wide range of applications suitable to this pump.
Plural-Component Material Supply
Polyurethane Foam - home insulation, commercial building insulation, industrial roof insulation, patch work, window sealer, rim joistPolyurea Coatings
Polyurea Coatings - concrete, water proofing, truck bed liners, blast mitigation, bulk tank corrosion protection, fish ponds, swimming poolsPolyurethane Foam
Fluid Transfer
Tank and Pipe Linings
Graco's Transfer Pumps are able to pump virtually any material. Below you find a small listing of the wide range of products suited to Graco's Pumps. Give us a call at 330-861-5200 to discuss alternate materials in more detail.
- Isocyanates
- Catalysts
- Adhesives
- Resins
- Polyurea
- Polyurethane
Did you know that switching between half pound and two pound foam is five minute, hassle free job?
Graco has released a new heater style for all of its Reactor line of proportioners