IPM Transfer Pumps deliver with reliability in their design and diversity in their capabilities

The IP-02 is designed specifically for difficult to handle materials. The immersed lower pump, tie-tubes, and sealing bung bushing allow quick drum change without exposing the system to contamination or moisture.

Consistent feed pressures and flow rates for consistent results

1. 100 series air motor is identical to 100 Series 1:1. Common design allows for common service parts.
2. Rotatable air motor coupling allows air inlet and fluid outlet to be oriented to any position.
3. Recirculation fitting to allow material to be returned to drum
4. Separable bung bushing allows fast slip-in/slip-out drum change. Bushing is not a part of the pump. No need to disconnect hoses and rotate pump. Sealed design provides moisture barrier.
5. "Tie-Tube" design allows above-the-drum fluid outlet with immersed lower pump
6. Full length wet cup prevents material from hardening on rod stroke area while changing drums. Extends seal life.
7. Immersed lower pump assembly maintains wetted rod and seal area, preventing material from hardening. Extends rod and seal life.

Ratio	2:1
Maximum Output - continuous	2.5 gpm (9.5 lpm)
Maximum Output - intermittent	3.7 gpm (14.2 lpm)
Maximum input air pressure	180 psi (12 bar, 1.2 MPa)
Maximum output fluid pressure	360 psi (24 bar, 2.4 MPa)
Maximum ambient temperature	120°F (50°C)
Maximum fluid temperature	190°F (88°C)
Weight	16.1 lb (7.3 kg)
Dimensions	50 in (127 cm) length

Giving the ability to handle a range of applications IPMs Transfer Pumps are some of the most flexible in the market today.

Feeding

• Use it as a means to feed two or more fluid components from a container to a proportioning machine. The pumps are directly inserted into the drum. All you need is an air line to drive the pumps. Simple.
• Recommended pumps are IP-01, IP-02, OP232C

Fluid Transfer

• Use it as a means to transfer fluid of various viscosities from a container.
• Wide range of pump ratios to choose from for various fluid viscosities.

Circulate

• Use as means to circulate paints or other fluid mediums
• Wide range of pressure ratios to suit various viscosities
• Driven by just one compressed air line
• Explosion proof

Spray Applications

• Conventional Air Spray
• HVLP Air Spray
• Air-Assisted Airless Spray
• Airless Spray

The IPM IP-02 transfer pump is truly one of the most diverse pumps with its careful and thoughtful construction allowing it to handle one of the largest array of materials in the industry to date.

• Polyurethanes (Isocyanate or Polyol)
• All kinds of paints
• Coatings
• Mold release
• Stains
• Varnishes
• Lacqueurs
• Lubricants
• Water