Proportioners
Spray Guns
Spray Hoses
Transfer Pumps
Safety & Protection
Gensets & 
0.5lb Open-cell Spray Foam
2.0lb Closed-cell Spray Foam
3.0lb Roofing Foam
Silicone Coatings
Sealants
1.0lb Kits
2.0lb Kits
3.0lb Kits
closeGraco Reactor In-plant
)
view
largerEntry-level unit designed for rigid and flexible in-plant foam applications
The Graco Reactor IP is engineered for accuracy in pouring, with precision temperature and pressure control. Its shot and control module allows up to 25 different pre-programmed volume settings and five shot sequences. There is a choice between the IPH-25 and IPH-40, please view the technical tab above to view the details between each.- Low initial investment - ideal as an entry-level system
- Linear transducer provides precise volume repeatability and accuracy
- Hybrid heater design heats material quickly and maintains temperature set points
- Remote mountable controls
- Pressure Imbalance Control prevents off-ratio conditions
- Programmable Standby Mode shuts the system down after a period of inactivity
- Easy clean-up – no gun purging, no solvent flush
Depend on
the Reactor IP for outstanding performance, accuracy and
repeatability
- New Local Control Module
- Allows up to 25 different pre-programmed volume settings and five shot sequences
- Electrical Control Box
- Provides an easy connection between the local control module, pour gun and Reactor IP
- New Linear Transducer
- Provides accurate volume repeatability from part to part
- Optional Data Recorder
- Records and compares material temperatures and pressures for critical applications
- Horizontal Pumpline
- Robust pump design provides extended seal life. Different ratios can be achieved by combining different rod pump sizes. Ratio range is from 4.6:1 to 1:4.6. 81 pump combinations are available.
- Circulation Valves
- Designed to reduce isocyanate crystallization
- Digital User Interface
- Separate temperature and motor controls allow you to quickly set, maintain and monitor machine performance
IPH-25 Specifications
| Max Working Pressure | 2000 psi (140 bar, 14 MPa) |
| Max Hose Length | 310 ft (94 m) |
| Output | 25 lb/min (11.3 kg/min) |
| Heater Wattage | 8,000 watts |
| Max Ambient Temperature | 120°F (49°C) |
| Max Fluid Temperature | 190°F (88°C) |
| Weight | 8 kW: 535 lbs (243 kg) |
| Operation Manual | 312062/312878 |
| Repair Manual | 312063 |
IPH-40 Specifications
| Max Working Pressure | 2000 psi (140 bar, 14 MPa) |
| Max Hose Length | 410 ft (125 m) |
| Output | 50 lb/min (22.6 kg/min) |
| Heater Wattage | 12,000 watts or 15,300 watts |
| Max Ambient Temperature | 120°F (49°C) |
| Max Fluid Temperature | 190°F (88°C) |
| Weight | 600 lbs (272 kg) |
| Operation Manual | 312062/312878 |
| Repair Manual | 312063 |
In-plant Polyurethane Foam Processing Systems
Take total control of your in-plant foam applications with the
new Reactor IP proportioner from Graco. The Reactor IP is engineered
for accuracy in pouring – with advanced controls and technologies
for unparalleled performance.
- Insulation for coolers and containers
- Pre-formed foam block for housing
- Refrigerator panels
- Cabinets
- Solar panels
- Insulation for doors and windows
- Pipe insulation
- Surfboards
- Heater tanks
- Wall and floor panels
This Graco H-25 is one of the most dynamic in the industry with its ability to spray foam all the way to caulks and adhesives
- Spray Foam
- Polyurea Coatings
- Adhesives and Caulks
- Polyurethane Coatings
