Proportioners
Spray Guns
Spray Hoses
Transfer Pumps
Safety & Protection
Gensets & 
0.5lb Open-cell Spray Foam
2.0lb Closed-cell Spray Foam
3.0lb Roofing Foam
Silicone Coatings
Sealants
1.0lb Kits
2.0lb Kits
3.0lb Kits
close
Graco Fusion CS Gun
)
view
larger
Plural-Component Spray Gun with ClearShot™ Technology
The new ClearShot Technology sets the Graco Fusion CS gun apart from every other spray foam gun. With its revolutionary technology, the Fusion CS is poised to virtually eliminate drilling of the mixing chamber - increasing your spraying uptime and reducing time spent on maintenance. Designed for both foam and polyurea applications, this gun provides you with versatile advantages.- Screw-in-place side seals
- Chemical-resistant front cover
- Manual on/off valves
- Chromex™-coated side seals/Mix chambers
- Faster trigger response
- "Air Knife"
- Lightweight
- Less material blow-back
Technology that lets you spray all day
ClearShot Technology sets the Fusion CS gun apart from all
other spray guns. The secret of the revolutionary ClearShot
Technology is the blue, non-toxic ClearShot Liquid. ClearShot
Liquid is contained in a disposable, non-reusable cartridge,
which is easily inserted into the gun’s ergonomic handle. Every
time the trigger is pulled, ClearShot Liquid dispenses into the
mixing chamber and dissolves any built-up chemical - keeping it
clean. Each cartridge contains about 1,500 trigger shots
(pulls) a day, allowing you to work through one to two kits of
spray foam.
- Virtually eliminates drilling of the mix chamber – increasing spraying uptime and reducing downtime spent on maintenance
- Maintains patterns and maximizes each kit with a clean mix chamber, saving time and money on material
- Benefits daily and annual productivity
The Graco Fusion Gun has revolutionized the world of Spray
Polyurethane Foam with its technical dvances and breakthroughs
- New ClearShot Cartridge
- Keeps gun mix chamber clear
- New manifold
- Easy on/off valves
- Check valves block fluid flow when manifold is disconnected
- Quick filter screen change-outs
- Variable flow setting
- Switch from large to small spray patterns in seconds
- Ten different settings
- Industry-first quick-change front end
- Swap out fluid head in seconds
- Non-stick polymer cover for easy cleanup
- "Air Knife" reduces material buildup
- Liquid purge
- Reduces purge air by 75%, minimizing material blowback
- Gain flexibility and maneuverability to spray in small tight areas
- Chromex-coated side seals and mix chamber
- More resistance to corrosion and wear
- Save time and money in replacements over the long-term
- Screw in place side seals
- Overall maintenance is quicker and simpler
- Fewer o-rings ensure better crossover protection and keep appropriate mix and proportions of material for better end results
- Faster/shorter trigger pull
- Responsive trigger delivers quick shots
- Diminishes operator fatigue
| Maximum Output | 45 lb/min (11.3 kg/min) |
| Minimum Output | < 1 lb/min (< 0.45 kg/min) |
| Max Fluid Working Pressure | 3500 psi (240 bar, 24.0 MPa) |
| Purge Method | Air purge |
Settings new standards in the spray foam industry, the Fusion CS Gun is one of the most versatile guns available today.
When talking about which spray foam or coatings applications are best suited for the Graco Fusion CS Gun, the answer is going to be high volume applications in the following situations:
Residential
Spray Foam Insulation
This Fusion CS foam spray gun is suitable for all foam
insulation jobs of all sizes, especially due to its variable flow
feature. The ability to change the flow rate comes in handy since
all construction has large and small cavities. With a traditional
gun, everything is sprayed with the same mixing chamber since it’s
an effort to change the chambers. Obviously, this is not necessary
with the new Fusion CS.
Commercial
Building Insulation
Due to the ClearShot Technology, the Fusion CS will
deliver the daily throughput that’s critical in today’s large-scale
and competitive environment. The ClearShot technology allows for
longer service intervals, which reduces labor requirements and
costs.
Spray
Foam Roofing
Staying on ratio and keeping up productivity is easy
with the Graco Fusion CS. Long service intervals, combined with the
ability to reduce flow rate for detail work, make this spray gun a
winner.
Polyurea
and other Coatings
Low blow-back and variable flow rates are a major
advantage when it comes to coating applications.
This Graco Fusion CS Gun is one of the most dynamic in the industry with its ability to spray foam all the way to caulks and adhesives
- Spray Foam
- Polyurea coatings
- Polyurethane coatings
- Adhesives
- Caulks
