Every detail, every comfort accounted for with 3M's full face respirator

Voltage	Power ESP kWe/kVA	Power PRP kWe/kVA	Standby Amps	Dimensions	Weight
480/277	40/50	36/45	60	Length: 67 in. (1700mm) Width: 35 in. (896mm) Heigth: 48 in. (1221mm)	1807 lbs (820kg) Net 2050 lbs (930kg) Gross
440/254	40/50	36/45	66
380/220	40/50	36/45	76
240/120	40/50	36/45	120
230/115	32/40	29/36	100
220/127	40/50	36/45	131
208/120	37/46	33/42	128

PRP: Prime Power is available for an unlimited number of annual operating hours in variable load applications, in accordance with ISO 8528-1. A 10% overload capability is available for a period of 1 hour within 12-hour period of operation, in accordance with ISO 3046-1

ESP: The standby power rating is applicable for supplying emergency power in variable load applications in accordance with ISO 8528-1. Overload is not allowed.

Engine Specifications

Standard Features	Manufacturer/Model	JOHN DEERE 3029TF270 , 4-strokes, Turbo, N/A 3 X
	Cylinder Arrangement	L
	Displacement	2.9L [177.0C.I.]
	Bore and Stroke	106mm [4.2in.] X 110mm [4.3in.]
	Compression Ration	17,8:1
	Rated RPM	1800 rpm
	Piston Speed	6.6m/s [21.7ft./s]
	Max stand by Power at rated RPM	44.5kW [60BHP]
	Frequency regulation, steady state	+/-2, 5%
	BMEP	11.19bar [162psi]
	Govenor: Type	Meca
Exhaust System	Exhaust temperature	517°C [963°F]
	Exhaust gas flow	138L/s [292cfm]
	Max back pressure	625mm CE [25in. WG]
Fuel System	110% (Stand By power )	14.93L/h [3.9gal/hr]
	100% (of the Prime Power)	13.11L/h [3.5gal/hr]
	75% (of the Prime Power)	10.1L/h [2.7gal/hr]
	50% (of the Prime Power)	6.91L/h [1.8gal/hr]
	Max. fuel pump flow	108L/h [28.5gal/hr]
Oil System	Total oil capacity w/filters	6L [1.6gal]
	Oil Pressure low idle	1bar [14.5psi]
	Oil Pressure rated RPM	5bar [72.5psi]
	Oil consumption 100% load	0.01L/h [0.0gal/hr]
	Oil capacity carter	5.3L [1.4gal]
Thermal Balance	Heat rejection to exhaust	43kW [2445Btu/mn]
	Radiated heat to ambiant	5kW [284Btu/mn]
	Heat rejection to coolant	28kW [1592Btu/mn]
Air Intake	Max. intake restriction	300mm CE [12in. WG]
	Engine air flow	48.6L/s [103cfm]
Coolant System	Radiator & engine capacity	48.6L/s [103cfm]
	Max water temperature	105°C [221°F]
	Outlet water temperature	93°C [199°F]
	Fan power	2 kW
	Fan air flow w/o restriction	2.34m3/s [4959cfm]
	Available restriction on air flow	20mm CE [0.8in. WG]
	Type of coolant	Gencool
	Thermostat	82-94 °C
Emissions Level	PM	0.12 gr/bhp/h
	CO	1.12 gr/bhp/h
	HC/Nox	5.00 gr/bhp/h

Settings new standards in the spray foam industry, the H-25 is one of the most versatile machines today.

When talking about which spray foam or coatings applications are best suited for the Graco H-25 the answer is going to be high volume applications in the following situations:

Spray Foam Insulation

This machine is right for high output, large scale residential or commerical spray foam insulations.
Read more about spray foam insulation >

Foam Roofing

No matter how large or small the roof this machine will deliver the output needed to finish the job on time.
Read more about spray foam roofing >

In-plant OEM

Refrigerators, cold storage panels or any other exact injection work will be well suited with this proportioner.

Polyurea and other Coatings

If your primary applications are truck bedliners or other hard-coat finish work, this spray foam proportioner is the clear choice.