15 kW Gillette Gen-Pro Generator
A fantastic success story is the best description for the extra-quiet, smooth running Kohler driven portable generator sets. These are the generators to choose, when you need more electric power in a small compact package.
For those who want and need the very best, GILLETTE GENERATORS give you an all USA made, heavy duty generator with (6) exclusive features. The remaining features are also randomly found on other competing generator sets.
| Maximum kW | Prime kW | Prime Amps @ 120V | Prime Amps @ 240V |
|---|---|---|---|
| 15.0 | 13.5 | 112 | 56 |
- "KLEEN-POWER" design allows only 7% harmonic distortion of the generated power sine-wave. Harmful harmonic distortions over 10% may do damage to your plugged-in electric load.
- "POWER-ASSIST" design allows 35% more copper wire and electrical grade steel laminations than leading competitor gen-sets. This gives you huge (50% surge over rated kw), extra starting power for hard starting electrical motors.
- HEAVY DUTY DIODES gives you a "life time warranty" from failure on the most frequently replaced part on other brand gen-sets.
- HEAVY-DUTY CAPACITOR gives you "Life-Time" warranty from failure on the second most commonly replaced part on other brand gen-sets.
- AUTOMATIC LOAD BALANCE eliminates load chatter and excessive vibration due to unbalanced electric loads.
- INSULATION DESIGN gives you superior insulation against un-wanted heat for a longer lasting winding.
Engine Specifications
| GENERATOR REGULATION | PLUS OR MINUS 5% FROM NAMEPLATE RATING |
| FREQUENCY REGULATION | PLUS OR MINUS 5% FROM NAMEPLATE RATING |
| KOHLER, AIR COOLED, OHV | WAVEFORM DISTORTION AVERAGES 6% - 7% |
| ENGINE BRAND | KOHLER, AIR COOLED, OHV |
| ENGINE MODELS | CH25 |
| ENGINE STARTER | ELECTRIC STARTER |
| ENG. HP/3600 RPM | 25 |
| ENG. CU. CENTIMETER | 725 |
| ENGINE CYLINDERS | 2 V-TWIN |
| ENGINE MUFFLER | SUPER LO-TONE |
| LOW OIL PROTECTION | STANDARD ENGINE SHUT-DOWN PROTECTION |
| db(A) AT 7 METERS | 88 |
| FUEL TANK (GAL.) | 8 |
| 3/4 LOAD RUN TIME (HRS.) | 5.0 |
| FUEL USE (GAL/HR) | 1.6 |
| FULL PRESSURE OIL LUBE WITH SPIN-ON FILTER | YES |
| CODE G, ELECTRIC MOTOR STARTING POWER | 5 HP |
| BUILT-IN 2 WHEEL DOLLY | YES |
| MAIN CIRCUIT BREAKER | MAIN LINE AUTOMATIC CIRCUIT BREAKER PROTECTING WINDINGS AND INDIVIDUAL CIRCUIT BREAKERS PROTECTING EACH RECEPTACLE. |
| VOLTMETER & HOURMETER | STANDARD EQUIPMENT ON CONTROL PANEL |
| 120 VOLT RECEPTACLES | (4) NEMA 5-15R, 120 VOLT, 20 AMP WITH GROUND FAULT CIRCUIT INTERRUPTERS (GFCI) |
| 120/240 VOLT RECEPTACLE | (1) NEMA L5-30R |
| LENGTH, INCHES | 37 |
| WIDTH, INCHES | 26 |
| HEIGHT, INCHES | 29 |
| NET WEIGHT (LBS.) | 337 |
Settings new standards in the spray foam industry, the H-25 is one of the most versatile machines today.
When talking about which spray foam or coatings applications are best suited for the Graco H-25 the answer is going to be high volume applications in the following situations:
Spray Foam Insulation
This machine is right for high output, large scale residential or commerical spray foam insulations.Read more about spray foam insulation >
Foam Roofing
No matter how large or small the roof this machine will deliver the output needed to finish the job on time.Read more about spray foam roofing >
In-plant OEM
Refrigerators, cold storage panels or any other exact injection work will be well suited with this proportioner.
Polyurea and other Coatings
If your primary applications are truck bedliners or other hard-coat finish work, this spray foam proportioner is the clear choice.

Proportioners
Spray Guns
Spray Hoses
Transfer Pumps
Safety & Protection
Gensets &
0.5lb Open-cell Spray Foam
2.0lb Closed-cell Spray Foam
3.0lb Roofing Foam
Sealants
1.0lb Kits
2.0lb Kits
3.0lb Kits



close